Automatically when a computer fails or turns itself off , we often think that has crept us a virus and if there is a solution, it must only be in the hands of a few computer gurus. The virus seems to be the most recurrent explanation and the cause of all ills.
But sometimes the computer problem does not possess any mysterious cause. It is a simple matter of cleaning your computer : the fans are dirty and dust is not good friend of computing. Let's see what can be done.
Clean a computer inside: how is it done?
The cleaning of a PC is usually a very delicate work and very scary for beginners, but it is essential for everything to work properly. Sometimes the problem that a computer does not turn on may also be due to the accumulation of dust inside. If that is your case, you should follow the following steps:
1. OPEN THE TOWER HOUSING
This is the point of separation between those who want to be understood and those who do not. To open a case and see the computer inside nothing happens. How does the tower open? You will usually have small screws in the back. You must unscrew them with a screwdriver and then carefully pull the case out of the case. Sometimes you do not even have to unscrew and simply remove small plates.
2. CHECK THE FANS
When we open and see what is inside, we must identify the components. We will see that there are a lot of slots and connectors of all kinds. In the central part, we find three pieces together on the motherboard: fan, heat sink and microprocessor . If the dust does not let air through the heatsinks, the microprocessor overheats and loses performance. We will also find a fan of hot air, which is the one that is seen through the slot. It is very important that both are clean of dust.
3. REMOVE THE HEATSINK AND FAN?
In principle, it is also possible to clean inside the same housing without disassembling anything, but it may be more convenient to disassemble the fan and the heatsink over the microprocessor and take advantage of it to replace the thermal paste. It will have to remove some sheets with which it is inserted and the connectors of the fan to be able to remove it.
4. USE A CLEANING INSTRUMENT
To clean this piece you have several options: you can use an air compressor to PC , a small brush or brush small, and if dirt is very stuck, use a mini-screwdriver , but very gently and carefully not Damage or puncture the blades.
5. REPLACE THE PARTS
Then it is critical to check that all the parts are in place and make sure that they have been cleaned properly. Also make sure that the microprocessor does is perfectly attached to the heatsink , for which you will need thermal paste . Once everything is in place and the fan connected, replace the case and try to see how it works.
We speak here of corrective computer maintenance , although it is desirable to make this process every so often to prevent problems. How old is your computer working? Do not you think it's time to open it and remove all the accumulated dust? If you have a problem with cleaning your computer hardware or you find it very difficult, do not hesitate to leave your comment.
0 comments:
Post a Comment